Eton E5 Operación Manual página 13

Ocultar thumbs Ver también para E5:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

CLOCK AND ALARM FEATURES
TIME ZONE ABBREVIATION LIST
ANC-Anchorage
BEG-Beijing
BKK-Bangkok
CAI-Cairo
CCS-Caracas
CHI-Chicago
DAC-Dhaka
DEL- Delhi
DEN-Denver
DXB-Dubai
GMT-GMT
HKG-Hong Kong
SETTING THE CLOCK AND WEEKDAY:
In the clock set procedure below, while the hour or minute digits flash
in steps 2 or 4, press one of the buttons 1-7 to select the day of the
week (32). The '1' button represents Sunday. The selected weekday
will then be within a box.
1. Press the PAGE/TIME button (4) for about 2 seconds or until the
hour digits (29) start flashing.
2. Within 3 seconds, use the tuning knob (40) to set the correct hour.
3. Give the PAGE/TIME button a quick, short press, noting that the
minute digits (29) start flashing.
4. Within 3 seconds, use the tuning knob to set the correct minutes.
5. Allow the minutes to stop flashing. The clock is set.
24
continued
HNL-Honolulu
JED-Jeddah
KHI-Kashi
LAX-Los Angeles
LON-London
NOU-Noumea
NYC-New York City
PAR-Paris
RIO-De Janeiro
SYD-Sydney
TYO-Tokyo
WLG-Wellington
CLOCK AND ALARM FEATURES
To view other time zones:
This allows viewing other time zones without changing the home
time zone.
1. Quick, short press of TIME ZONE button. 'Tzone' appears in the
display.
2. Use tuning knob to select desired time zone. Once selected, that
time zone's time appears in the display for about 30 seconds.
3. To exit T-zone mode earlier, use a quick, short press of the TIME
ZONE button.
SETTING THE ALARMS 1 THROUGH 4 (20-23)
Alarms can be set with the E5 turned on or off.
The E-5 has 4, independently programmable alarm timers (buttons
F1-4) to turn it on at a specified time. Additionally, each timer can be
programmed for a specific weekday, volume, playtime and memory
location.
To set an alarm:
In the procedure below, while setting hour or minutes, pressing one
of the 1-7 buttons selects/deselects the day of the week for the alarm
to activate. While the digits are flashing a box will appear around the
selected day of the week. The box will disappear once set mode is fin-
ished, with the box then surrounding only the current day of the
week.
1. With the E-5 turned off, perform a long press of one of the F1-4
buttons (about 3 seconds), causing the hour to flash.
2. Use the tuning knob to set the hour.
E5
OPERATION MANUAL
continued
25

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido