Working With Memory; Storing Stations Into Memory; Labelling Memory - Eton E5 Operación Manual

CLOCK AND ALARM FEATURES
3. Press the PAGE/TIME button (4).
4. Use the tuning knob to set the minutes.
5. Press the PAGE/TIME button.
6. Use the tuning knob to set the wake-up volume.
7. Press the PAGE/TIME button.
8. Use the tuning knob to set the wake-up alarm's play minutes.
9. Press the PAGE/TIME button.
10. Use the tuning knob to set the page number.
11. Press one of the F1-7 buttons to select the memory location on
the selected page (the square flashes).
12. Press the PAGE/TIME button to finish the set-up.
ACTIVATING/DEACTIVATING THE ALARMS
For an alarm to turn on the radio, it must be activated. To activate
the alarm to be used, turn off the E-5 and press the appropriate
alarm button, F1-4. This causes the timer activation symbol (28) to
appear in the upper left corner of the display, activating the selected
alarm. To deactivate the alarm, press the appropriate F1-7 button,
causing the alarm activation symbol to disappear.
26
continued
7

WORKING WITH MEMORY

The E5 has 700 memories (also called presets), arranged in 100
pages, with each page holding 7 memories. Buttons F1-7 represent
memory locations.

STORING STATIONS INTO MEMORY

Note that when storing into an already occupied memory position, its
contents will be replaced with your new entry.
1. Turn on the E5.
2. Tune to the desired station.
3. Press the PAGE/TIME button (4) to place the E-5 into MEMO mode.
4. To select the desired memory page (00-99) use the
hold down the STORE button (16) and use the tuning knob.
5. While holding down the STORE button (16), press one of buttons
F1-7, storing the station into that memory. Note that a box appears
around the selected memory location.
6. Release the STORE button.
7. To store another station, tune to the station and repeat steps 4-6
above.
8. When finished storing stations, press the PAGE/TIME button (4) to
exit MEMO mode.
LABELING MEMORY PAGES
Memory pages can be uniquely labeled with four, intermixed digits or
letters.
1. Select memory mode with the PAGE/TIME button (4). MEMO
appears in the display.
E5 OPERATION MANUAL
buttons or
27