Operating instructions SATA air humidifier
EN
ing remedies.
If it is not possible to remedy the malfunctions with the described correc-
tive action, send the breathing protection apparatus to the SATA customer
service department. (For address see chapter 12).
Malfunction
Water leaks at the filler
screw
Water contamination
12. After Sales Service
For accessories, spare parts and technical support, contact your SATA
dealer.
13. Spare Parts
Art.
No.
211904
[11-1]
226621
[11-2]
14. EU Declaration of Conformity
We hereby declare that, in its design and construction as well as in the
version as it is produced and distributed by us, the product described in
the following corresponds to the fundamental health and safety require-
ments of Directive (EU) 2016/425 as well as the fundamental safety re-
quirements of EC-Directive 2014/34/EU including any changes applicable
at the time of this declaration.
This Declaration loses its validity in case of any alteration to the device
that has not been approved by us.
The manufacturer bears the sole responsibility for the issuance of this
declaration of conformity.
Manufacturer
SATA GmbH & Co. KG
Domertalstrasse 20
86
Cause
O-ring damaged
■ Incorrect storage
■ Humidifier module
damaged
Description
Package with 4 CCS-disks (sorted by colour,
in bag)
Modifier module set, consisting of modifier
module, cover seal and SATA filter timer
Corrective action
Insert new O-ring
■ Drain water tank
■ Insert new humidifier
module
Num-
ber
1 pc.
1 pc.