General Specifications; Electrical Specifications - Wavetek Meterman HD160B Manual De Instrucciones

General Specifications

Display: 4 digit LCD, 9999 counts, with
annunciators, menu features and 41
segment bargraph.
Polarity Indication: Automatic
Input overload indication: I.OL.
Low Battery Indication:
hours battery life remain, accuracy is no
longer guaranteed
Display Update Rate: 2/sec, nominal;
20/sec for bargraph.
Oper. Temp. 0°C to +50°C
@ 0 - 80%R.H.
Storage Temp: -40°C to 70°C @ 0 to 95%
RH, battery removed
Altitude: 2000 meters - indoor/outdoor use
Temperature coefficient: <0.1 x (spec. accu-
racy)/°C (-0° to 20°C and 30° to 50°C)
Fusing: 0.25A/500V; I.R. 10kA (6.35x32mm)
20A/600V; I.R.100kA (10x38mm)
Power: Standard 9-volt battery, NEDA
1604, JIS 006P, IEC 6F22
Auto Power-Down: Meter powers down
after approximately 30 minutes of
inactivity. Not in Min/Max function.
Battery Life (typical): 450 hours, alkaline.
Backlight usage consumes extra power
and will decrease battery life
significantly. Backlight auto-off after
approx. 60 seconds.
Dimensions, without holster (H x W x D): ,
200x102x59 mm (7.9" x 4;0" x 2;3")
Weight (incl. battery): 642 g (22 oz)
Accessories: Test leads, spare 0.25A/500V
fuse and battery (installed), hex wrench
(inside holster), flex strap and
Operator's Manual
Case material: Reinforced, high-impact,
fire retardant thermoplastic
Safety: Meets EN61010-1 Cat III -
SPECIFICATIONS
Directives: 89/336/EEC (Electromagnetic
; less than 50
Compatibility) and 73/23/EEC (Low
Voltage) as amended by 93/68/EEC (CE
Marking).
However, electrical noise or intense
electromagnetic fields in the vicinity of the
equipment may disturb the measurement
circuit. Measuring instruments will also
respond to unwanted signals that may be
present within the measurement circuit.
Users should exercise care and take
appropriate precautions to avoid
misleading results when making measure-
ments in the presence of electronic
interference.
Accuracy at 23°C ± 5°C, <75% RH,
guaranteed for one year.
DC Volts
Ranges: 1, 10, 100, 1500V
Resolution: 0.1mV in 1V range:
Accuracy, 1V range: ±(0.25%rdg +6dgt)
Accuracy, 10V to 1500V ranges: ±(0.1%
Input Impedance: 10MΩ
CMRR: >120dB up to 1500Vdc
NMRR: >60dB at 50 or 60Hz
OL Protection: 1500VDC or 1000Vrms.
AC Volts.
Ranges: 10, 100, 1000V
* in instrument
Resolution: 1mV in 10V range
Accuracy, 10V range:
- 14 -
1500VDC or 1000VAC.
Class 2. EN60529:IP67
EMC: Meets EN55011, EN61326-1
EMC:
This product complies
with requirements of the
following European Community

Electrical Specifications

rdg +2dgt)
Transient protection: 6kV for 10µSec.
45Hz-10kHz: ±(1.5% rdg +5dgt)