Disposal; Technical Data - SIMALFA Primus Instrucciones De Servicio

Use only those cleaning materials for cleaning the spray gun which have been pre-
scribed by the manufacturer of the spraying material and which do not contain the
following:
• halogenated hydrocarbons (e.g. 1,1,1, trichloroethane, methylene chloride, etc.)
• acids or acidic cleaning agents
• regenerated solvents(so-called cleaning thinners)
• varnish removers
The constituents named above cause chemical reactions on galvanised components
and lead to corrosion damage.
The manufacturer will not accept warranty claims for damages resulting from such
treatment.
Basic cleaning of the spray gun should be carried out::
• at least once a week
• several times a week, depending on the material and the degree of contamina-
tion. In this manner, the safe functioning of the spray gun is maintained.
1. Disassemble the gun.
2. Clean the air head and the material nozzle with a brush and the cleaning agent.
3. Clean all other components and the gun body with a cloth and the cleaning
agent.
4. Apply a thin layer of grease to the following parts, we recommend the ALFA
Hand Cleaner:
• Material needle
• Needle Spring
• All sliding parts and bearings.
• The moveable inner parts should be greased at least once a week.
• The springs should at all times be coated with a thin layer of grease.
Use non-acidic, non-resinogenic grease or ALFA Hand Cleaner and a brush. The
spray gun is then reassembled in reverse order.
10

Disposal

Spray media as well as materials used during cleaning and maintenance shall be
properly disposed of in compliance with laws and regulations.
Warning
Follow the information of the spray and cleaning agent manufacturer. Carelessly dis-
posed of material puts the health of persons and animals at risk.
32
11

Technical Data

SIMALFA Primus-HVLP
Net weight:
Pressure ranges, medium pressure:
max. spraying pressure
max. intake air pressure
max. material pressure
Working pressure
Pressure ranges, low pressure:
max. spraying pressure
max. intake air pressure
max. operating temperature:
Sound level
(measured at approx. 1 m
distance from the spray gun):
Air Consumption:
Air head
SIMALFA Primus HVLP 1061
material connection upper
SIMALFA Primus HVLP 1161
material connection lower
Subject to technical alterations.
33
490 g
1.4 bar
3.3 bar
8 bar
ca. 2 bar
0.7 bar
3,5 bar
43 °C
83 dB(A)
Intake air pressure Air Consump-
of the spray gun tions
3,5 bar 340 L/min.
3,5 bar 340 L/min.