Removing The Battery Cover; Removing The Battery; Replacing The Battery - Advanced Bionics NEPTUNE Manual De Uso

Removing the Battery Cover

1.
Hold the sound processor in one hand.
2.
Firmly grip the ends of the Battery Cover and, starting at one end, pull it away
from the sound processor.
Never insert your fi ngernail or any type of tool into the Battery Cover to try to pry it
off the processor as this may damage the battery seal allowing water and debris to
enter into the Neptune battery compartment.

Removing the Battery

1.
Hold the sound processor in one hand.
2.
Grasp the AAA battery at one end and pull it away from the sound processor to
remove.

Replacing the Battery

1.
Hold the sound processor in one hand.
2.
Position the positive end (+) of the AAA battery into the appropriate contact as
marked inside the processor housing.
3. Push the negative end (-) of the battery into the opposite contact in the processor
housing.
Note: If the AAA battery is inserted in the wrong orientation, the Neptune sound
processor will not turn on.
Insert battery only as shown to prevent loss of function
User Guide for the Neptune™ Sound Processor 19