Removing Headpiece Color Caps; Using The Neptune Connect; Attaching And Removing The Neptune Connect - Advanced Bionics NEPTUNE Manual De Uso

Removing Headpiece Color Caps

The UHP and AquaMic Color Caps are available in a variety of colors to match
or coordinate with your Neptune sound processor. A Color Cap must be in place
at all times when using your headpiece. You may need to remove your headpiece
Color Cap to change the look and style of your headpiece, as part of routine
troubleshooting, or, in the case of the AquaMic, to fully dry following submersion. To
remove your headpiece Color Cap, only use the tool provided by Advanced Bionics.
See the Color Cap, UHP, or AquaMic 'Instructions for Use' for additional information
regarding removal and replacement of headpiece Color Caps.

Using the Neptune Connect

Sync Light Euro Port Connector
Volume Dial Sensitivity Dial
The Neptune Connect enables adjustment of volume, sensitivity, and program
settings. It also provides access to wireless FM and other battery-powered audio
devices for Neptune sound processor users. Additionally, a listening check of the
headpiece microphone and FM connection can be conducted with the Neptune
Connect attached.
By design, the Neptune Connect is removable, providing the ultimate in tamper-proof
controls for very young children. Removing the controls also enables the smallest
possible wearing confi guration and the ability to use your sound processor while
swimming and bathing.
Note: The Neptune Connect is not intended for water use, and should be removed
from the sound processor prior to swimming or bathing. Additionally, you should
ensure that the processor is completely dry following water use before attaching
the Neptune Connect.

Attaching and Removing the Neptune Connect

Release Latch
22 User Guide for the Neptune™ Sound Processor