Safety Hints - Endress+Hauser RIA 450 Manual De Instrucciones

Safety hints

Correct use
- The process display displays signals from transmitters, RTDs
and thermocouples. It is also fitted with alarm relay contacts
and a loop power supply output.
- The manufacturer cannot be held responsible for damage
caused by incorrect use of the instrument. Changes must not
be made to the unit.
- The unit has been designed for use in industrial areas and
must only be used in an installed condition.
- The process display is manufactured using state of the art
technology and complies to the EN 61010-1 directives.
The unit could become dangerous if it is incorrectly installed or
used.
Therefore please take note of all the safety hints and
pictograms shown in these installation and operating
instructions. The meaning of the pictograms is as follows:
Hint: "Hint" means activities or sequences that, if not done
correctly could have an indirect influence on the units
operation or could release an unforeseen unit reaction.
Attention: "Attention" means activities or sequences that, if not
done correctly could lead to personal injury or faulty
unit operation.
Warning: "Warning" means activities or sequences that, if not
done correctly could lead to serious personal injury,
to a safety risk or total damage to the unit.
Process display
33