Endress+Hauser RIA 450 Manual De Instrucciones página 62

Process display
Mechanical Dimensions
construction
Weight
Materials
Electrical
connection
Display and Display
operation level
Display range
Operation
Set point Mode
function
Number
Display
Scan rate
Power supply Power supply
Power
consumption
Fuse
Certification CE mark
Technical alterations reserved!
60
W: 96 mm, H: 96 mm, D: 168 mm
approx. 670 gr.
Plastic PC (polycarbonate)
Plug on screw terminals 2 x 12 pin 2.5 mm² solid core,
1.5 mm² multi core with ferrule
LC display three colour, rear illuminated;
41 element bargraph with 4 set point arrows (yellow)
4 x 7 segment, 15 mm, numeric value (orange)
4 x 14 segment, 6 mm, engineering unit (orange)
4 x 1 segment set point infringement (red)
4 x undercut, 4 x exceed (red arrow)
-999 to +9999
3 push button operation (+/-/E)
Off, minimum, maximum safety, trend monitor, alarm
4
Two bargraph markings per set point, 1 signal field and
1 exceed/undercut arrow for point
400 ms
90...250 VAC, 50/60 Hz
Option: 18...36 VDC, 24 VAC +/-10%, 50/60 Hz
8 VA
315 mA slow blow (90...250 VAC),
1 A slow blow (18...36 VDC)
Directive 89/336/EWG and 73/23/EWG