Nexgrill UNIVERSAL PARTS 710-0007 Manual De Instalación página 15

Equipo de conversión a gas natural
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

FOR MISSING PARTS, PLEASE CALL CUSTOMER SERVICE AT 1-800-913-8999
MAIN & SIDE BURNERS
810-8501-S
Note: All orifices of the grill are double orifices type (LP gas
and natural gas). You only remove the LP gas orifice
tip.
Note: Double check that all control knobs are in the off
position and make sure that LP tank valve is closed
and the tank is disconnected from regulator and
removed from grill.
Step 4.
Use a ¾ inch wrench to loosen the main gas hose coupling nut
while using an adjustable wrench to hold the gas manifold
secure. Replace the LP gas hose/regulator assembly with the
natural gas hose assembly provided. Tighten the connection
carefully using the two wrenches. See Illustration-4.
Step 5.
Use a screwdriver to remove the two screws from the side
burner bracket. Carefully lift the side burner up and away from
the gas valve nozzle. Set the burner and screws aside for later re-
installation. See Illustration-5.
Illustration-5
Step 6.
Open the grill lid and remove the warning rack, cooking grates,
and flame tamers following the instructions contained in the
Owner's Manual for your grill. Set these parts aside for later re-
installation. See Illustration-6.
INSTALLATION INSTRUCTIONS
Side Burner
Illustration-4
Illustration-6
15
Cooking Grates
Heat Shields
Warming Rack

Publicidad

Capítulos

Tabla de contenido
loading

Productos relacionados para Nexgrill UNIVERSAL PARTS 710-0007

Tabla de contenido