Connecting Electric Dryers (cont.)
USA only
WARNING
fire or death.
Four-wire connection for electric dryers:
Power cord
manufactured home installations, as well as all new
back of the dryer. Install a UL-listed strain relief into
the power cord through-hole; then thread a UL-listed,
conductor power cord through the strain relief.
UL-Listed
Cord
forked terminals with upturned ends.
green ground screw to the center screw of the
terminal block. Attach the two hot leads of the power
cord to the outer terminal block screws. Attach the
white neutral wire to the center terminal block screw.
Attach the power cord ground wire to the green
ground screw.
Reinstall the terminal block access cover.
Ground
Screw
Power Cord
Ground Wire
Terminal
UL-Listed
Strain Relief
INSTALLATION INSTRUCTIONS
conductor and closed loop or
Neutral
White Wire
moved from
Ground Screw
25
.