Technical Data; Emissions; Scope Of Supply; Use According To Intended Purpose - Mafell KF 1000 Manual De Instrucciones Original

2.3 Technical data

Universal motor, radio and TV
interference suppressed
Power input (nominal load)
Current at nominal load
Idling speed
Tool holding fixture with collet ø
Tool shank maximum
Tool shank minimum
Milling cutter Ø, maximum
Weight without mains cable
Length of connecting cable
Dimensions (W x L x H)

2.4 Emissions

The values stated are emission levels. Although there is a correlation between emission and imission level, it
cannot be reliably derived from this whether additional precautions are necessary. Factors influencing the
current immission level existing at the workplace comprise the duration of exposure, the room characteristic,
other sources of noise, etc. such as e.g. the number of machines and other adjacent machining operations. In
addition, the permissible immission level may differ from country to country. This information is nevertheless
suitable for providing the machine user with an improved assessment of the hazard and risk.
2.4.1 Noise emission specifications
Noise emission values determined according to DIN EN ISO 3744:
Sound pressure level
Uncertainty
Sound power level
Uncertainty
The noise measurement was done without tool at idling speed.

2.5 Scope of supply

Edge cutter KF1000 complete with:
1 milling table, complete
1 face-milling cutter ø 19 mm
1 collet Ø 8 mm
1 open-ended spanner AF 17
1 operating manual
1 folder "Safety Instructions"

2.6 Use according to intended purpose

The KF1000 is exclusively suitable for flush milling and profile milling of wood, plastics and similar materials in
conjunction with the complete milling table included in the supply.
230 V~, 50 Hz
1000 W
4.6 A
4,000 - 25,000 rpm
8 mm (0 5/16 in.)
8 mm (0 5/16 in.)
3 mm (0 1/8 in.)
30 mm (1 3/16)
2.1 kg (4.63 lbs)
4 m (13 1/8 ft.)
103 x 226 x 328 mm (4 1/16 x 8 57/64 x 12 29/32)
L = 71 dB (A)
PA
K = 3 dB (A)
PA
L = 82 dB (A)
PA
K = 3 dB (A)
PA
-16-