Technical Data; Noise Emission Specifications; Vibration Specifications; Scope Of Supply - Mafell LO 50 E Manual De Instrucciones Original Y Lista De Piezas De Recambio

2.3 Technical data

Universal motor, radio and TV interference
suppressed
Input power continuous operation
Idling speed
Speed electronically stabilised under load
Milling depth adjustment with fine adjustment
Revolving depth control turret
Tool fastening with collets
Hose connector diameter
Weight without mains cable

2.4 Noise emission specifications

Noise emission values determined according to EN 60745-1 and EN 60745-2-17:
Idling
Machining
The noise level measurements were carried out with an end mill Ø 8 mm.
The values stated do not take into consideration any possible series variances and are not suitable for
determining the rating levels, as these fluctuate in dependence on the time in service, the respective type of
machining and the environmental influences. The noise rating level can therefore only be determined on an
individual basis at the machine user's position.

2.5 Vibration specifications

The typical hand-arm vibration is 7 m/s

2.6 Scope of supply

Router LO 50 E complete with:
1 parallel guide fence
1 reduction plate
1 template guide Ø 20 mm (25/32 in.)
1 collet Ø 8 mm / 5/16 in. (Ø ¼" - CH/GB)
1 extraction hood
1 operating tool
1 carrying case
1 operating manual
1 folder "Safety Instructions"
Sound power level
89 dB (A)
93 dB (A)
.
2
230 V~, 50 Hz or 110 V~, 50 Hz
1000 W or 900 W
10000 – 22000 rpm or 9500 – 24000 rpm
0 - 50 mm (0- 1 31/32 in.)
3-stage
Ø 6 – 8 mm (15/64 - 5/16 in.)
35 mm (1 3/8 in.)
2.7 kg (6 lbs)
Workplace-related emission value
78 dB (A)
82 dB (A)
-16-