Servicing; Troubleshooting; Accessories; Repairs - Metabo H 16-500 Instrucciones De Manejo

ENGLISH
ENG
disappears (approx. 5 seconds). The entered
values are now saved in the program.
Note:
- To return from program operation to the normal
function, press the program button (8) until the
program symbol in the display (9) has disap-
peared.
- The factory settings of the programs are listed in
chapter11.
5.4 Stationary operation
If you wish to use the heat gun as a stationary
tool, ensure that it is placed on a safe, anti-
slip and clean base.
To use the heat gun in stationary operation, place
it on the anti-slip bases (5).

6 Servicing

The air inlet (3) with grid must be free of foreign
bodies. Clean the air inlet (3) if necessary.

7 Troubleshooting

Thermal protection
The thermal fuse switches the tool off completely
in the event of overloading.
Short-term voltage drops
Switching on the machine reduces the voltage
briefly. Unfavourable mains power conditions may
have a detrimental effect on other machines.
Network impedances less than 0.4 ohms should
not cause malfunctions.

8 Accessories

Use only genuine Metabo accessories.
If you need any accessories, check with your
dealer.
For dealers to select the correct accessory, they
need to know the exact model designation of your
power tool.
For possible accessories, refer to the illustrations
on page 3.
A Flat spray nozzle
Drying, removal of old paint coats
B Spray nozzle
Removal of paint coats on window frames
C Reflector nozzle
Heating of plastics prior to forming; shrink
fitting of shrinking hoses
8
D Slotted nozzle
Lap welding of PVC fabrics and foils
E Reducing nozzle (only HE 20-600, HE 23-650
Control) for precise heating of specific points
(e.g. solders and welds)
F Welding shoe
G Plastic welding wire
for welding work
For a complete range of accessories, see
www.metabo.com or the main catalogue.

9 Repairs

Repairs to electrical tools must be carried out
by qualified electricians ONLY!
If you have Metabo electrical tools that require
repairs, please contact your Metabo service
centre. For addresses see www.metabo.com.
You can download spare parts lists from
www.metabo.com.

10 Environmental Protection

Metabo's packaging can be 100% recycled.
Scrap power tools and accessories contain large
amounts of valuable resources and plastics that
can be recycled.
These instructions are printed on chlorine-free
bleached paper.

11 Technical Specifications

H 16-500
Rated mains voltage: 120 V
Rated mains frequency:50/60 Hz
Output: 1400 W
Air temperature: Stage 1:................... 750 °F
Stage 2:.................. 1100 °F
Air volume: Stage 0:..........................Off
Stage 1:...............8.5 cf/min
Stage 2:.............14.8 cf/min
Thermal protection: thermal fuse
Weight
HE 20-600
Rated mains voltage: 120 V
Rated mains frequency:50/60 Hz
Output: 1500 W
Air temperature: Stage 1:................... 120 °F
Stage 2:...........120-1100 °F
Stage 3:...........120-1100 °F
28.9 oz (820 g)