Personnel Qualification; Specifications - WIKA air2guide P A2G-10 Manual De Instrucciones

2. Safety / 3. Specifications

2.2 Personnel qualification

GB
Skilled personnel
Skilled personnel are understood to be personnel who, based on their
technical training, knowledge of measurement and control technology
and on their experience and knowledge of country-specific regulations,
current standards and directives, are capable of carrying out the work
described and independently recognising potential hazards.
Explanation of symbols

3. Specifications

Pressure limitation
Steady:
Fluctuating:
Overpressure safety
Plus and minus side 20 kPa
Max. working pressure (static pressure)
20 kPa
6
WARNING!
Risk of injury should qualification be insufficient!
Improper handling can result in considerable injury and
damage to equipment.
The activities described in these operating instructions
■
may only be carried out by skilled personnel who have
the qualifications described below.
CE, Communauté Européenne
Instruments bearing this mark comply with the relevant
European directives.
full scale value
full scale value
WIKA operating instructions air2guide models A2G-10, A2G-15