Preparing The Appliance For Operation - Unold 48165 Instrucciones De Uso

PREPARING THE APPLIANCE FOR OPERATION

1. Before using the appliance for the first time, we recommend that you wipe
off the two non-stick baking surfaces with a damp cloth.
2. If a mild odour becomes perceptible after heating up your new appliance for
the first time, it is completely harmless.
3. Open the window during the burn-in phase that now follows.
4. Close the appliance, plug the plug into an electrical outlet (220-240 V~,
50 Hz). The red operating indicator light is illuminated and shows that the
heating circuit is in operation.
5. Place the temperature controller on medium level.
6. The green indicator light will be illuminated as soon as the pre-heating phase
ends.
7. Heat up the appliance for approx. 10 minutes.
8. After the burn-in phase there may already be visible traces of use. How-
ever these do not affect the function of the appliance and do not constitute
grounds for a complaint.
9. Before using the appliance for the first time, lightly grease both baking sur-
faces with a brush with a heat-resistant shortening or vegetable oil.
10. Attention: We always recommend that you not eat the first pancakes prepared in
the appliance; dispose of them. For each subsequent use of the appliance, natu-
rally this is no longer necessary!
Copyright UNOLD AG | www.unold.de
21