Upholstery - Hoover Steamvac F7452-900 Manual Del Proprietário

Attach hose
Unplug cleaner from electrical outlet.
Insert short hose end, matching tabs on
hose with same-sized slots in port. Push
hose into port and lock in place.
Open hose connection port (A).
To remove hose: Squeeze latches (C) on
top and bottom of hose. Remove hose
from port. Close door.
Remove solution tube from solution con-
nection port.
Select tool
Your model includes the following tools.
D. SpinScrub
TM
hand tool has rotating
brushes for extra scrubbing action on
small carpet areas, carpeted stairs and
upholstery.
E. Stair/upholstery nozzle has a built-in
brush to help provide the scrubbing
action some spots may need for
removal.
Plug solution tube firmly into solution
connection port (B).
How to attach tools
/
Unplug cleaner from electrical outlet.
1 Place handle in upright position and
remove hose from rack.
All tools attach to the hose in the same
manner:
2. Connect tool to hose by sliding it onto
connector until the tab (F) locks it
securely.
Using your thumb, push forward and
up on the latch (G) to remove tool.
After using tool
Drain suction hose by turning cleaner
ON and holding nozzle up for several
minutes. Do not press trigger.
Unplug cleaner from electrical outlet.
Disconnect hose and solution tube
from cleaner.
The tool caddy can be removed and
hung on a coat hanger for storage.
Drain solution tube by placing round
end in sink and raising nozzle above
your head. Press the trigger.
14