Bresser National Geographic 96-83001 Instrucciones De Uso página 36

Base-Mount:
Snap the base mount (5) into the base (9). Use the flat or curved base, depending on
the surface. Now use the thumb knobs (4) to mount the waterproof case (2).
J F
Bicycle mount:
Attach the waterproof case with camera (1/2) on the multifunction mount 6a.
Now secure the bicycle mount (3) to multifunction mount 6a and then attach
to the handlebars. Tighten the thumb knobs (4) firmly.
b c
/
Belt mount:
Place the camera (1) in the housing and then snap the clip for the belt holder to the
housing. Fix the clip to the belt.
b
36
E
D
E G
a
h
c
E