Cembre RHU240-3D-850 Manual De Uso página 3

60
32b
32a
12
15
11
FIG. 1
DIE INSERTION - INSERTION DES MATRICES - POSITIONIERUNG DER PRESSEINSÄTZE
INSERCIÓN DE LAS MATRICES - INSERIMENTO MATRICI
FIG. 2 STORAGE CASE
RANGEMENT
LAGERUNG
ALMACENAMIENTO
CUSTODIA
35b
42
32b
40
32a
35a
12
04
17
50
1. GENERAL CHARACTERISTICS
– Application range: suitable for installing compression connectors for conductors up
50
– Crimping force: ........................................................................................................ 240 kN
– Max. operating pressure: .................................................................................... 850 bar (12,150 psi)
– Dimensions: length ............................................................................................... 283 mm (11.1 in.)
width ................................................................................................. 129 mm (5.0 in.)
– Weight (without dies): ........................................................................................... 5,5 kg
The adapter AU240-130D is available as an optional extra enabling the head to utilise the
semi-circular slotted dies common to most 130 kN tools.
2. INSTRUCTIONS FOR USE
2.1) Setting
(Ref. to Fig. 1)
The head is equipped with a "self-lock" quick male coupler and can be connected to a Cembre
hydraulic pump developing 850 bar pressure.
For safe operation a safety shackle (04) is provided for additional support.
2.2) Die insertion
a) Dedicated dies (Ref. to Fig. 1)
– Select the appropriate die set for the connector to be crimped.
– A checkplate (60) aligns the upper die with the die locating pin (12).
Dies without the checkplate (60) may be inserted into the head by manually aligning the die
locating pin (12) in the die.
– Extract the die locating pin (12) from the head.
– First, insert the lower die (32a) into the fork (11) and align the groove in the die with the guide
screw (15) in the fork (11).
– Then fi t the upper die into the head and insert the die locating pin (12).
– To remove the dies from the head, extract the die locating pin (12) and slide out the dies.
2
HYDRAULIC PRESSHEAD
RHU240-3D-850
to .......................................................................................... 30 mm
ENGLISH
2
(1250 MCM)
(27 sh ton)
(12.1 lbs)