Bosch WC18C Instrucciones De Funcionamiento página 6

2610035860_WC18C 8/25/14 8:42 AM Page 6
The battery is supplied partially charged.
Completely charge the battery before using your
cordless tool for the first time. The lithium ion
If the indicator lights are "OFF", the charger is
not receiving power from power supply outlet.
Continuous Light Standby Indicator (green)
A continuous green standby indicator
shows that the main plug has been
plugged into the socket outlet and
that the charger is ready for use.
Flashing Charge Status Indicator
The charge status indicator
flashes while charging. The
number of green bars indicate
the charge level . All five bars
green means that the battery is fully charged.
The light then changes from flashing to
continuous. Note: The tool and battery can be
removed from the charger at any time and
used.
Standard battery contacts compatible with
existing Bosch chargers: BC630, BC660,
BC1836. See relevant manuals for details.
operating Instructions
Charger Indicators, symbols and meaning
Wireless Charging Battery
WIRELESS
CH RGING
SURF CE
battery can be charged at any time, without
reducing its service life. Interrupting the charging
procedure does not damage the battery.
Continuous error Indicator (red)
A continuous red error indicator
shows that the battery temperature is
outside of the permitted temperature
range. As soon as the permitted
temperature range is reached, the charger
automatically begins charging.
Flashing error Indicator (red)
A flashing red error indicator signals a
different
'Troubleshooting' section.
ST ND RD
B TTERY
CONT CTS
FIG. 2
Charging surface: place on WC18C wireless
charger charging platform. Entire battery
charging surface must be in direct contact with
battery charger charging platform.
-6-
charger fault. See