For proper air flow, allow at least 15 cm (6 in) of space
above and below the controller, and 50 mm (2 in) at
the sides - see Figure 3-1 below. Install in an area
protected from direct rain and direct sun.
If the controller is installed in an enclosure, some
ventilation is recommended. Do not locate in an
enclosure where battery gases can accumulate.
2 in /
50 mm
Figure 3-1. Proper Clearances for Passive Cooling
12
Installation
6 in / 150 mm
6 in / 150 mm
3.4 Wiring
5
4
2
1
To battery (+)
To properly
and (-)
sized array
terminals
Figure 3-2. Wiring the EcoPulse
REFER TO FIGURE 3.2 WHEN USING THE FOLLOWING
WIRING INSTRUCTIONS
EcoPulse Operator's Manual
To load (+)
and (-)
terminals
3
13