Technical Data - HSM Pure 320 Instrucciones De Servicio

Ocultar thumbs Ver también para Pure 320:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 31

10 Technical data

Cutting type
Cut size (mm)
Security level DIN 66399
Cutting capacity* (sheets), A4
Noise level (Idle running / load)
Weight
Intake width
Cutting speed
Power supply
Power consumption
with max. number of sheets
Operating mode
Operating time
Idle time
Ambient conditions in operation:
Temperature
Relative humidity
Height above sea-level (MSL)
Size W x D x H (mm)
Shredded material container volume
* The maximum number of sheets (DIN A4, 70 g/m² or 80 g/m²), fed lengthways, which can be cut in one cycle. The
performance data is determined when the motor is cold and the cutting device is freshly oiled. A weaker mains voltage
or a different mains frequency to the one specifi ed could result in less sheet capacity and increased noise during oper-
ation. The sheet capacity can vary depending on the structure and properties of the paper and on the way it enters.
This document shredder meets the applicable harmonisation legislation of the European Union:
• Low Voltage directive 2006/95/EU
• EMC directive 2004/108/EU
• RoHS directive 2011/65/EU
The EU declaration of conformity can be requested from the manufacturer.
16
5.8
P-2, O-2, T-2, E-2
80 g/m
15 - 17
2
70 g/m
2
16 - 18
55 - 58 dB(A) / 55 - 59 dB(A)
230 V, 50 Hz
HSM Pure 320
english
Strip cut
3.9
P-2, T-2, E-2
12 - 14
13 - 15
9.9 kg
230 mm
50 mm/s
120 V, 60 Hz
360 W
Brief operation
7 min
16 min
-10 °C to +25 °C
max. 90 %, without condensation
max. 2,000 m
365 x 255 x 556
25 l
Cross cut
3.9 x 30
P-4, T-4, E-3, F-1
7 - 8
8 - 9
55 - 58 dB(A)
57 - 63 dB(A)
11.1 kg
220 V, 60 Hz
05/2015

Publicidad

Tabla de contenido
loading

Tabla de contenido