Getting Started Of Bluetooth; Easy Pairing Function - Kenwood KDC-BT752HD Manual De Instrucciones

Getting Started of Bluetooth

Easy Pairing function

Press and hold
1
mode
"PAIRING" is displayed.
Any of the following is displayed
■ ■
depending on Bluetooth device
registration condition:
– "SEARCHING": When registering a
Bluetooth device for the first time.
– "(device name)": When a Bluetooth
device has already been registered.
– "DEVICE FULL": When a maximum of five
Bluetooth devices have already been
registered.
To cancel the easy pairing mode, press
■ ■
When registering a Bluetooth device for the
first time (Registering a Bluetooth device)
"SEARCHING" is displayed.
2
Search for the Bluetooth device.
When search is completed, "FINISHED" is
displayed.
Turn the volume knob to select a
3
Bluetooth device name, press to confirm.
"CONFIRM DVC" is displayed.
4
If "PAIRING OK" is displayed, proceed to
step 7.
If "PIN CODE" is displayed, proceed to steps
5.
If "*** NG" is displayed, press the volume
knob. Proceed to steps 4.
16
English
TAG
VOICE
PAR
Press and hold to easy pairing mode.
to enter easy pairing
Input the PIN code
5
To select the number, turn the volume
■ ■
knob.
To move to the next digit, press ¢.
■ ■
To delete the last digit, press 4.
■ ■
Press the volume knob to transmit the
6
PIN code.
If "PAIRING OK" is displayed, registration is
completed.
When "CONFIRM DVC" is displayed, confirm
connection with a Bluetooth device
operation.
The receiver is connected to a Bluetooth
7
device, with "HF CONNECT" or "AUD
CONNECT" displayed, and exits the easy
.
pairing mode.
If an error code is displayed during paring,
■ ■
see <Troubleshooting> (page 32).
If the error message appears even though
■ ■
the PIN code is correct, try the procedure
mentioned in <Registering a Special
Bluetooth device> (page 22).
When a Bluetooth device has already been
registered, or maximum of five Bluetooth
devices have already been registered
(Selecting a Bluetooth device)
"(device name)" or "DEVICE FULL" is
2
displayed.
Turn the volume knob to select a
3
Bluetooth device name.
iPod