- If the equipment is connected directly to the
power supply by means of the main electrical
panel without the use of a plug, a key-switch or
device with padlock fixture must be provided
to restrict use of the equipment to authorised
personnel only.
WARNING
A good earth connection is essential for correct
operation of the equipment.
NEVER connect the earth wire to a gas or water
pipe, telephone wire or any other unsuitable
objects.
WARNING
Before connecting the power plug to the power
panel make sure that the line voltage is the
same as the power supply indicated on the
equipment's data plate.
sAFETY REGULATIons
The equipment is intended for professional
use only.
WARNING
Only one operator may work on the equipment
at a time.
WARNING
Failure to comply with the instructions and
danger warnings may cause serious injury to
operators and to others in the vicinity.
Before starting up the equipment, always
ensure you have read and understood all the
danger/warning signs in this manual.
Only qualified, authorised operators are capable
of using this equipment correctly. In order to be
classified as skilled, operators must be capable of
understanding the written instructions provided
by the producer, and be trained and familiar with
the safety rules and labour regulations.
Operators must not use the equipment under
the influence of alcohol or drugs which may affect
their capacity. In all cases, it is essential to:
- Be able to read and understand all the infor-
mation in this manual.
- Have a thorough knowledge of the capabilities
and characteristics of this equipment.
- Keep unauthorised persons well clear of the
Operator's Manual EXACT 7000
area of operations.
- Make sure that the equipment has been
installed in compliance with all the relevant
legislation and standards.
- Make sure that all system operators are suit-
able trained, that they are capable of using
the equipment correctly and safely and that
they are adequately supervised during their
work.
- Not touch power lines or electrical equipment
without first making sure that the power supply
has been disconnected.
- Read this manual carefully and learn how to
use the equipment correctly and safely.
- Always keep this operator's manual in a place
where it can be readily consulted and to consult
it whenever appropriate.
WARNING
Do not remove or deface the Attention, Warning
or Instruction decals. Replace any missing or
illegible decals. Missing or damaged decals can
be obtained at your nearest Corghi dealer.
- When using and carrying out maintenance on
the equipment, observe the standardised
industrial accident prevention regulations.
- Unauthorised alterations or changes to the
equipment relieve the constructor of all liabil-
ity for any consequent damage or accidents. In
particular, tampering with or removing safety
devices constitutes a breach of Safety at Work
Regulations.
WARNING
During work and maintenance operations, al-
ways tie up long hair and do not wear loose or
floppy clothing, ties, necklaces, wristwatches
or any other items that may get caught up in
the moving parts.
GB
53