NEO STEAM 700 Manual De Usuario página 9

Fasten the Steam 700RGBA onto firm trussing
(Use a 15-kg rated or stronger C-clamp bolted
onto bottom of Steam 700RGBA, enhancing safety
necessarily with safety cables). Leave at least one
meter at all sides for air circulation.
7. SET UP
1. Open the shipping carton and carefully remove
the unit from the shipping carton.
2. Be sure to remove packing material from
around the fog machine, especially near the
nozzle.
3. Set the fog machine on a dry, flat surface.
4. Place the feeder tube with filter deep inside the
full fog fluid tank (C of figure1). Use only high
quality, water-based fog fluid.
5. Firmly attach the remote control mechanism
to socket (O of figure1) on the back of the unit.
Or use DMX control setting (H of figure1) on
the back of the unit.
6. Plug mains power cord from the fog machine
into appropriate power supply socket. Wait
about 9 minutes for heating element to heat up.
P. 9
English version - Neo Steam 700 RGBA