Getting Started; Preparing A Bluetooth Device; Setting The Clock; Connecting An Ipod/Usb Device - Sony XSP-N1BT Manual De Instrucciones

ML.book Page 7 Tuesday, January 14, 2014 1:28 PM

Getting Started

Setting the Clock

1
Press and hold MENU.
2
Press a/{ to select [GENERAL], then
press ENTER.
3
Press a/{ to select [CLOCK-ADJ], then
press ENTER.
4
Press a/{ to set the hour and minute.
5
After setting the minute, press ENTER.

Connecting an iPod/USB Device

1
Turn down the volume on the unit.
2
Connect the iPod/USB device to the unit.
Note

Preparing a BLUETOOTH Device

Pairing and connecting with a
BLUETOOTH device
R C
1
Place the BLUETOOTH device within 1 m
(3 ft) of this unit.
2
Press CALL.
3
Press a/{ to select [PAIRING], then press
ENTER.
4
Perform pairing on the BLUETOOTH
device so it detects this unit.
5
Select [Sony Car Audio] shown in the
display of the BLUETOOTH device.
6
If passkey input is required on the
BLUETOOTH device, input [0000].
7