Getting Started; Resetting The Unit; Performing Initial Settings; Setting The Clock - Sony XAV-64BT Manual De Instrucciones

Ocultar thumbs Ver también para XAV-64BT:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Getting Started

Resetting the unit

Before operating the unit for the first time, or
after replacing the car battery or changing the
connections, you must reset the unit.
Press the reset button (page 11) with a pointed
object, such as a ballpoint pen.
Note
Pressing the reset button will erase the clock setting
and some stored contents.

Performing initial settings

After resetting, the display for the initial settings
appears.
Initial Setting
Rear/Sub Out
Listening Position
Language
1
Touch "Rear/Sub Out" to set the
subwoofer connection status.
If a subwoofer is connected, select "Sub."
If a power amplifier is connected, select
"Rear."
If neither a subwoofer or power amplifier is
connected, you can select either "Sub" or
"Rear."
2
Touch "Listening Position" to set the
listening position.
Set to "Front L" if your listening position is
front left, or "Front R" if front right.
3
Touch "Language" to set the display
language.
Touch repeatedly until the desired language
(English/Spanish/Russian) appears.
4
Touch "OK."
The setting is complete.
This setting can then be further configured in the
setting menu.
• For details on setting the subwoofer connection
status, see page 47.
• For details on setting the listening position, see
"Optimizing sound for the listening position —
Intelligent Time Alignment" on page 40.
• For details on setting the display language, see
page 44.
Rear /
Sub
Front L
/ Front R
English
OK

Setting the clock

The clock uses a 12-hour indication.
1
Touch "Source List," then
The general setting menu appears. If not,
touch "General."
2
Touch "Clock Adjust."
The setting display appears.
3
Set the hour and minute.
For example, to set to 8:30, touch "0830."
4
Touch "AM" or "PM."
5
Touch "OK."
The setting is complete.
To delete an entered number, touch "Clear."
To return to the previous display, touch "Back."
.
13

Publicidad

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

Xav-63

Tabla de contenido