Technical Data - HSM shredstar S5 Instrucciones De Servicio

english

10 Technical data

Cutting type
Cut size
Security level DIN 66399
Cutting capacity * (sheets), A4 80 g/m
Cutting speed
Intake width
Power supply
Power consumption
with max. number of
sheets
Weight
Shredded material container volume
Operating mode
Operating time
Cooling time
Ambient conditions in operation:
Temperature
Relative humidity
Height above sea-level (MSL)
Size W x D x H (mm)
Sound pressure level emissions
(Idle running/ load)
* The maximum number of sheets (DIN A4, 70 g/m² or 80 g/m²), fed lengthways, which can be cut in one cycle. The
performance data is determined when the motor is cold and the cutting device is freshly oiled. A weaker mains voltage or
a different mains frequency to the one specifi ed could result in less sheet capacity and increased noise during operation.
The sheet capacity can vary depending on the structure and properties of the paper and on the way it enters.
This document shredder meets the applicable harmonisation legislation of the European Union:
• Low Voltage directive 2014/35/EU
• EMC directive 2014/30/EU
• RoHS directive 2011/65/EU
The EU declaration of conformity can be requested from the manufacturer.
12
Strip cut
2
70 g/m
2
35 mm/s
220 mm
230 V / 50 Hz
Brief operation
-10 °C to +25 °C
max. 90 %, without condensation
max. 2,000 m
310 x 210 x 350
62 dB(A) / 65 dB(A)
HSM shredstar
6 mm
P-2
5
6
65 W
2.95 kg
12 l
4 min
15 min
08/2016