GE CDT 725 Serie Manual Del Propietário página 19

GEAppliances.com
The 3rd rack is also removable to allow extra large items to be placed in the upper rack:
To remove the 3rd rack:
E] Remove the silverware
and utensil trays.
(Seethe IMPORTANT NOTESin this section.)
E] Push the rack all the way to one side so that
a gap between it and the side rail forms on
the other side. Align the side rail posts with
the center of the clips on the rack and lift
straight up.
Rail posts Align rail posts with
on inside rack clips - Pullrack up
of rails
Rock
Pushrackto
one side
Rail
will
in or out
of this
opening
Rail
post
r_continuing to hold the rack in the lifted
position, repeat on the other side.
E] Once the rack is removed, push the side
rails all the way back into the dishwasher.
Rock
clips
To replace the 3rd rack:
r_ Extendboth side railsfully out of the dishwasher.
E] Orientthe rack so that its side clips are aligned
and centered with the posts on the side rail and
lower the clips onto the posts.
r_ Hove the rack to one sideof the dishwasheruntil
the clips fall onto the posts.
post
E] Continuing to hold the rack in the lifted
position, repeat on the other side.
r_ once the rack is replaced, pull it all the way
out to lock it in place in its side rails.
Pullrack all the way
out to lock it in place
Rail
posts
r6--1 Replace the silverware and utensil trays.
19