Audio Settings - JVC KD-DB912BT Manual De Instrucciones

AMAZON ALEXA
Start listening
While in Alexa idle state...
1
Press on the unit to activate Alexa.
The display shows: "LISTENING...".
2
Communicate with Alexa via the connected microphone. (Page 15)
3
During music playback in ALEXA source, you can perform the
following operations:
To
Play back/pause
Reverse skip/ Forward skip
During music playback, press to pause the music and activate Alexa. You
can now start to communicate with Alexa.
24
ENGLISH
On the faceplate
Press the volume knob.
Press S / T.

Audio Settings

1
Press and hold .
2
Turn the volume knob to select an item (see the following table), then
press the knob.
3
Repeat step 2 until the desired item is selected/activated or follow the
instructions stated on the selected item.
4
Press to exit.
To return to the previous setting item, press
[EQ SETTING]
[PRESET EQ] Selects a preset equalizer suitable to the music genre.
• Select [USER] to use the settings made in [EASY EQ] or [PRO EQ].
[FLAT]/[DRVN 3]/[DRVN 2]/[DRVN 1]/[HARD ROCK]/[HIP HOP]/[JAZZ]/
[POP]/[R&B]/[USER]/[CLASSICAL]
Drive equalizer ([DRVN 3]/[DRVN 2]/[DRVN 1]) boosts specific frequencies
in the audio signal to reduce the noise heard from outside the car or running
noise of the tyres.
• When the display demonstration is activated ([ON] is selected initially,
page 5), [HARD ROCK] is automatically selected as the [PRESET EQ].
– If you set [DEMO MODE] to [OFF] (page 5), [FLAT] is selected as the
default setting for [PRESET EQ].
.
Default: [XX]