Publicidad
Idiomas disponibles
Idiomas disponibles
Locating and securing this product
For maximum fire safety
Keep this product on the lowest secure floor in your home
or business. If a fire damages the flooring, there will be
less danger of injury to fire fighters below, or of damage
to the unit's contents.
To assure that the unit will perform properly in
case of fire, store it closed and locked, with the feet down.
The front plate where the model number appears, should
be facing out, not up.
Notice: Media Safes 1710 and 6720
Store the SentrySafe media chest or file in a cool, dry
location. Extended exposure to temperatures above 95ºF
(35ºC) activates the special insulation in your unit that
protects the contents in an actual fire. If activated
prematurely, this insulation won't be "fully charged,"
reducing its fire protective capability. If stored in a cool
place, the insulation will recrystalize, regaining the
maximum fire protection required for sensitive
computer media.
To lock and unlock
Two keys are packed with the unit.
• To lock, insert the key (with the lid closed). Turn the key
one-quarter turn to the right. Remove the key and store
it in a secure place. (Fig. A)
• To unlock, insert the key and turn it one-quarter turn to
the left. (Fig. B)
A
B
Latch and lock operation for
waterproof chests and files
(Models H2100, H2300, F2300, H3100, H3300,
F3300, H4100, H4300,F4300, KS2100, KS4100)
To unlock and open:
1. Insert key in lock and turn counterclockwise.
2. While pressing down on lid with one hand, squeeze
latch button with the other hand to open safe. (Fig. D)
To use latch feature:
1. Close and press down on lid to engage latch. (Fig. E)
2. Safe can now be transported without locking it.
To close and lock:
1. Close and press down on lid to engage latch.
2. Insert key in lock and turn clockwise to lock safe.
C
D
WARNING
Keys could potentially be locked inside unit.
To avoid this, do not open and place keys
inside unit before relocking!
To open waterproof models which
have been submerged in water:
1. Remove the unit from water.
2. Dry the exterior of the safe with a paper towel,
taking care to remove water droplets from around
the opening.
3. Remove any excess water from in between the lid
and the base.
4. Open the lid slowly; there may be a few droplets of
water on the gasket. If so, dry with towel.
WARNING
This product is not intended for the
secure storage of all materials.
Items such as firearms, other
weapons, combustible materials,
or medication should not be stored
in this unit.
NOTE: For the safe storage of firearms, please consider
SentrySafe Gun Safe products that are specifically
designed for this purpose. Contact Sentry Group
at 1-800-828-1438, or visit www.sentrysafe.com
for more information.
WARNING
DO NOT store delicate items directly in your product
SentrySafe products which offer fire protection have a
patented insulation that has a high moisture content. If
you choose to store delicate items such as jewelry with
working parts, watches, stamps, or photos in your product,
we recommend putting them in an air-tight container,
prior to placing them in the product for storage.
WARNING
DO NOT store pearls in this safe unit.
In the event of a fire, potential damage to delicate pearls
ocurs at temperatures much lower than the 350°F interior
performance measure which the UL classification perfor-
mance standard indicated guarantees. Therefore, DO
NOT store pearls in your SentrySafe product.
3
Publicidad
