Listening To External Sources; General; Care And Maintenance - Aiwa XR-MR5 Manual De Instrucciones

LISTENING TO EXTERNAL
SOURCES
f,g
POWER
AUX/D-IN
TO PLAY EQUIPMENT CONNECTED TO
THE AUX/VIDEO IN JACKS
1 Press AUX/D-IN so that "AUX" is displayed.
2 Play the connected equipment.
To change a source name in the display
The "AUX" display can be changed to "VIDEO" or "TV", according
to the equipment connected to the AUX/VIDEO IN jacks.
When "AUX" is displayed, press POWER while pressing AUX/D-
IN on the main unit. Repeat the procedure to select one of the
names.
To adjust the volume level of the equipment connected to the
AUX/VIDEO IN jacks
Press AUX/D-IN to call up the "AUX" indication, then press f
or g repeatedly.
The volume level can be adjusted from "AUX MIN" (minimum),
"AUX 1" to "AUX 6", followed by "AUX MAX" (maximum).
TO PLAY EQUIPMENT CONNECTED TO
THE DIGITAL IN JACK
1 Press AUX/D-IN so that "D-IN" is displayed.
2 Play the connected equipment.

GENERAL

CARE AND MAINTENANCE

Occasional care and maintenance of the unit and the software
are needed to optimize the performance of your unit.
To clean the cabinet
Use a soft and dry cloth.
AUX/D-IN
If the surfaces are extremely dirty, use a soft cloth lightly moistened
with mild detergent solution. Do not use strong solvents, such as
alcohol, benzine or thinner as these could damage the finish of
the unit.
Care of discs
• When a disc becomes dirty, wipe the disc from the center out
f,g
with a cleaning cloth.
• After playing a disc, store the disc in its case. Do not leave the
disc in places that are hot or humid.
En
29
ENGLISH