LEM HEME ISO 1000 Instrucciones De Uso página 17

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

Basic operation

Select the current measurement function by turning the rotary switch to the A
postion. The instrument will go into an autozero mode for- 10 seconds until
the ZERO symbol disappears.
Clamp around a single current carrying conductor. The instrument displays
the True RMS value of the current and the frequency of any AC component

Pressing the
key cycles the display through the AC and DC components
of the current. The analog bargraph always shows the True RMS (AC+DC)
value
ƒ
To activate the LIMIT (alarm) function press the
limit press the
key again and use the
key to increment the digit. When in this mode pressing the
turns the lower limit value off completely. To set the higher limit press the
key and use the arrow keys as above. To activate the LIMIT function
press the
key again.
To deactivate the LIMIT (alarm) function turn the rotary switch to a new
position
key. To set the lower
to selects the digit and the
- 17 -
first

Publicidad

Tabla de contenido
loading

Productos relacionados para LEM HEME ISO 1000

Este manual también es adecuado para:

Heme iso 2000

Tabla de contenido