LEM HEME ISO 1000 Instrucciones De Uso página 25

Memory (HEME ISO 2000)
To clear the memory, press the key for more than 2s to bring up
the „Clear All" screen. The small display will show and the large
display will show . Pressing the START key deletes the
.
contents of the memory and causes a return to the previous. Any
other key press reverts to the recalled screen without causing a
deletion.
NOTE: Deleting the contents of one memory location/zone does not
affect the contents of any other memory location/zone . To delete the
contents of other locations, the Power On function must be used
deliberately to select each location in turn.
Turn the rotary switch or press the key to exit without erasing
memory and return to the previous screen.
- 25 -