Memory (Heme Iso 2000); Memory Saving/Recalling Screens - LEM HEME ISO 1000 Instrucciones De Uso

Memory (HEME ISO 2000)

7. Memory (HEME ISO 2000)

7.1. Memory Saving/Recalling screens

Press the key for more than 2 seconds to store the displayed
STORE
STORE
data and related screens to memory.
is saved to memory.
2000 can store a maximum of 350 insulation test results to internal
memory. By default the readings are automatically stored into the
next available memory. The memory can be partitioned into zones or
locations if required through a Power On function (see section 8).
Recall dataset values – screens. Saved screens may be recalled for
viewing and editing. Recall may be invoked from either the normal or
save screen modes. Press
activated and the most recently saved screen is displayed first. If
there are no saved screens, the RECALL symbol is not displayed and
the display remains in the previous state. Other saved screens can be
accessed using the arrow keys. The
memory until the first stored screen is reached and the
moves up until the last stored screen is reached. It is possible to
toggle between the memory number and the actual values using the
key. This permits the user to find out how many screens are
saved to memory and advance to any particular screen by number.
Holding the arrow keys down scrolls up or down through the memory
and at any given screen number, pressing the
actual screen corresponding to that number.
Pressing the key deletes the image on display and is used for
editing the memory. If the deleted screen is not the most recently
saved then all other images „shuffle down" the memory and the next
image in the memory is displayed. If all images are deleted, the
symbol disappears and the display reverts to its previous
state. Pressing the
deleting all the memory. This has to be confirmed by pressing the
START key. To exit the CLEAR ALL mode press the
turn the rotary switch.
is displayed as the screen
will flash if the memory is fullThe HEME ISO
for more than 2 seconds .
key moves down the
key
-
key recalls the
for more than 2 seconds gives the option of
again or
- 23 -
is