Introduction; Proper Use; Features And Equipment - Parkside PMFW 280 A2 Instrucciones De Utilización Y De Seguridad

Introduction

The following pictograms are used in these operating instructions / on the device:
Read the operating instructions!
Always heed warning labels and
safety instructions!
Caution - Danger of electric shock!
Hazardous voltage – danger to life!
Explosive material!
V ~
Volt (AC)
W
Watts (effective power)
Multi­Purpose Tool PMFW 280 A2
Introduction
Q
We congratulate you on the purchase of
your new device. You have chosen a high
quality product. The instructions for use
are part of the product. They contain important in-
formation concerning safety, use and disposal. Be-
fore using the product, please familiarise yourself
with all of the safety information and instructions
for use. Only use the unit as described and for the
specified applications. If you pass the product on
to anyone else, please ensure that you also pass
on all the documentation with it.

Proper use

Q
The device is intended for sawing, cutting and sand-
ing. The preferred materials on which the device
can be used are: wood, plastic, drywalling, non-fer-
rous metals, fixings (e.g. nails, screws) and wall
tiles. It is particularly suitable for working close to
edges and precise work. Any other use or modifi-
36 GB/MT
n
Rated idle running speed
0
Safety class II
Wear hearing protection, dust protec-
tion mask, protective glasses and
protective gloves.
Keep children away from electrical
power tools!
Risk of loss of life by electric shock
from damaged mains lead or mains
plug!
Dispose packaging and appliance in
an environmentally-friendly way!
cation to the device shall be considered as improper
use and could give rise to considerable dangers. We
will not accept liability for loss or damage arising
from improper use. Not suitable for commercial use.

Features and equipment

Q
ON / OFF switch
1
Oscillation speed setting wheel
2
Ventilation slots
3
Clamping plate
4
Plunge saw blade (20 mm) Z20 A2
5
Plunge saw blade (32 mm) Z32 A2
6
Backing plate
7
Segment saw blade Z85 A2
8
Scraping knife Z52 A2
9
Clamping screw
10
Allen key
11
Sanding sheet
12
Vacuum dust extraction assembly (3-piece)
13
Housing attachment
13 a
Vacuum dust extraction duct
13 b
Ring connector
13 c