en
Exchange of the lighting
Replace faulty lights through new ones
immediately.
Please cut the connection between the
extractor hood and the power supply system!
The lightings remain hot for some time.
Please wait therefore for some time till the
lightings have cooled off.
After cooling-off the glass cover is to be
removed with a small screwdriver. Then the
lighting can be taken out. Please avoid any
skin contact with the luminous means. After
the exchange press the glass pane lightly to
a certain extent (lock in of the pane).
Dysfunctions
Please refer to our customer service if
- the extractor hood produces too much
undefined noise and the control of the
exhaust air path reveils no faults;
- the supercharger works faulty;
- the circuit operates invalid.
Please indicate your type of extractor hood
and the series number. These informations
are mentioned on the type sheet which is
situated inside the hood on the filter.
Disposal
Packaging
The packaging of the appliance is recyclable.
It is made up off cardboard and polyethylene
foil (PE). Please dispose these materials in
a environmentally aware, responsible way
and in accordance with the regulations of your
local authority.
Extractor hood
Your local community will be able to advise
you on an environmentally compatible
disposal of sorted out household
appliances.
Enviromental information
This appliance is labelled in accordance with
the European Directive 2002/96/EG
conceming used electrical and electronic
appliances (waste electrical and electronic
equipment - WEEE). The guideline
determines the framework for the return and
recycling of used appliances as applicable
throughout the EU. Please ask your dealer
about current means of disposal.
Technical data
Connection mains:
230 V / 50 Hz, max. 500 watt
Lighting: halogen
Type G/4 21520 (12 V, 20 watt)