Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Note:
The appearance of your oven control may differ slightly from the one illustrated below.
Control Pad
However, all functions are the same. Also, push buttons or pads may be shaped
differently than those appearing in this Use and Care Guide.
FUnotions
READ THE INSTRUCTIONS CAREFULLY BEFORE USING THE OVEN. For satisfactory use of
your oven, become familiar with the various functions of the oven as described below.
OFF CANCEL PAD-- Used to clear
any function previously entered
except the time of day and minute
timer. Push OFF CANCEL to stop
cooking.
\
\
/
\
\
\
\
BAKEPAD--
Used to
enter the normal
baking mode
temperature.
BROIL-- Used
to select the
variable
function.
CLEAN PAD--
Used to select
the self-cleaning
cycle.
UP and DOWN ARROWS PADS -- Used along with
the function pads to select oven temperature,
cooking time, stop time (when programming an
automatic stop time), time of day, clean time and
minute timer.
O
O
OVEN
O
PREHEAT
i CLEAN
i
O
DOORLOCKED
/
/
OVEN, PREHEAT & LOCK LIGHTS-- The "OVEN" light will glow each
time the oven unit turns on to maintain the set oven temperature. The
"PREHEAT" light will glow when the oven is first set to operate, or if the
desired temperature is reset higher than the actual oven temperature.
The "LOCK" light will flash until the door locks when the self-clean
cycle is in use. It glows constantly after the door locks.
CLOCK PAD--
Used to set the
time of day.
CLOCK
CO0_
SET
TiME
\
0®0
v
s o ,ME
/
•
FEATURE
INDICATOR
LIGHTS--These
light to show
which feature is
in use.
BAKETIME
PAD -- Used
to enter the
length of the
baking time
(if equipped).
TIMER PAD -- Used to set
or cancel the minute timer,
program a
The minute timer does not
delayed bake
start or stop cooking,
cycle (if
equipped).
STOPTIME
PAD -- Used
r_'
Z
to set the
C_
desired stop
_ .....
timefor
baking. Can
:_:
be used with
BAKE TIME to
The oven can be programmed
to: BAKE normally,
TIME BAKE, BROIL, SELF-CLEAN
Note: The oven function will not work if the time of day clock is not set.
For a silent
control
panel:
When choosing a function, a beep will be heard each time a pad is pushed. If desired, the controls can be programmed for
silent operation. Push and hold STOP TIME pad [_.
After 7 seconds, the control will beep once. This will block the controls
from sounding when a pad is pushed. To return the sound, push and hold STOP TIME pad _
again for 7 seconds until 1
beep is heard.
The electronic oven control is set to operate in °F (Fahrenheit) when shipped from the factory.
The oven can be programmed for any temperature from 170°F to 550°F (65°C to 287°C).
To change the temperature
to °C (celsius) or from °C to °F (control should not be in a
Bake or Clean mode):
1.
Push BROIL pad 8"
"-" " appears in the display.
2.
Push and hold the UP ARROW ^ pad until "HI" appears in the display.
3.
Push and hold BROIL pad _
until °F or °C appears in the display.
4.
PushUP ^ or DOWN ARROW v pad to change °F to °C or °C to °F.
5.
Push any function pad to return to normal operating mode.
Tem peratu re
Conversion
(Fahrenheit / Celsius)
9
Publicidad
Capítulos
Tabla de contenido
