Aventics GPC Serie Instrucciones De Servicio página 41

AVENTICS | GPC | R402003957–BDL–001–AB 39
For your safety
During assembly The warranty only applies to the delivered configuration. The
warranty will not apply if the system is incorrectly assembled.
Always depressurise the relevant part of the system before
installing or removing the GPC cylinder.
When lifting the device, take steps to avoid damage or injury.
Heavy items must be carried by two people or by one person
with lifting aids.
Make sure that installation of the GPC cylinder is complete
before connecting compressed air.
Secure the system against reconnection if installation is not
complete and you need to leave the system unattended.
Position cables where people cannot trip over them.
During commissioning Check that all pneumatic connection ports are connected or
plugged.
Make sure that the GPC cylinder and any attached system
components are properly secured.
When starting, increase the pressure slowly and use speed
control.
In service In certain applications and installation arrangements there
may be a risk of crush injuries. Always follow the site safety
instructions.
Where the unit is installed vertically, a suspended load may
drop if the compressed air is shut off. This may result in injury.
Always secure the area under a suspended load.
Maintenance Never use solvents or strong detergents. Never hose down the
GPC cylinder with water. Clean the GPC cylinder only with a
cloth slightly moistened with water or a mild detergent.
Waste disposal Dispose of the device in accordance with local regulations.