Gpc-E; Gpc-St; Gpc-Combinations - Aventics GPC Serie Instrucciones De Servicio

54 AVENTICS | GPC | R402003957–BDL–001–AB
Installation
F G J
F T
.
Tabelle 13: Combination of GPC-BV – GPC-BV
Piston size 12 – 16
Screw size M5x15

6.3.3 GPC-E

Equipment is generally attached to the threaded holes (F) or
through holes (G, J) in the front plate. Use screws according to the
following table:
Tabelle 11: Holes for attaching a load to GPC-E
Piston size
12 mm
00129079
16 mm
20 mm

6.3.4 GPC-ST

Equipment is attached to the threaded holes (F) in the cylinder.
Alternatively, use T-groove nuts size N6. See the following table:
Tabelle 12: Holes for attaching a load to GPC-ST
Piston size
12 mm
20 mm
00129080

6.3.5 GPC-combinations

Every GPC cylinder may, in general, be combined with another GPC
cylinder of the next larger piston size. For example according to
the following tables and illustrations.
16 – 20 20 – 25
M5x18 M6x20
Ø
F
M4
M4
M5
Ø
F
M5x8
M5x8
25 – 32 32 – 40 40 – 50
M6x20 M8x25 M8x30
Ø
G J
- 4 H9
5.5 mm 4 H9
5.5 mm 4 H9
T-groove
N6
N6
50 – 63 63 – 80
M10x30 M10x35
Ø
80 – 100
M12x40