Accessories; Kit For Stroke Length Adjustment; Sensors; T-Groove Nut - Aventics GPC Serie Instrucciones De Servicio

5.2

Accessories

5.2.1 Kit for stroke length adjustment

Used on the GPC-E for adjustment of the stroke length also on the
return stroke. Includes a shock absorber fitted with a holder on the
side of the cylinder body and a counterstay fitted on the side of the
00129062
front plate. See the product catalogue for available sizes.

5.2.2 Sensors

Magnetic sensors are used to sense the position of the piston in the
cylinder body. Sensor series ST4 (pico) is used for GPC-ST, and for
GPC-BV with piston size
used for the other versions of GPC. They are available with
different lengths of cable and with different types of connector.
See the product catalogue for a description of the various types.
00129063

5.2.3 T-groove nut

Used for the T-grooves on the cylinder body. See the product
catalogue for available sizes.
6

Installation

The GPC cylinder is dimensioned for a particular application. It
must never be altered or modified from its original configuration.
Check that the maximum values for working pressure, load,
torque or speed stated in the technical specifications are not
exceeded.
AVENTICS | GPC | R402003957–BDL–001–AB
∅
10 mm. Sensor series ST6 (micro) is
43
Installation