kChanging the mode settings
Recording
mode
NORMAL
E-MAIL
BITMAP
MULTI
Notes
• The file data for index screen is a available only on this camera.
• If you attempt to record 55 images or above, "DISK FULL" appears on the
LCD screen and you cannot record the image even when the remaining disk
capacity indicator is not emptied.
• 1/4-size E-mail files are stored in another folder. The compression ratio is
standard and does not depend on the image quality settings.
• A remaining capacity of about 1MB is needed when recording in BITMAP
mode. After recording the BITMAP picture, "DISK FULL" appears on the
LCD screen.
• In MULTI mode, the program AE, picture effect and focus are fixed to the
selected mode and effect, respectively, and the flash is kept OFF. The focus
may not be right if the zoom is operated. The compression ratio is standard
and does not depend on the image quality settings.
• During playback of a series of images recorded in MULTI mode, the first
image of the nine is displayed one-size smaller than the other normal-sized
images.
• Be sure to play back images recorded in MULTI mode on MVC-FD71/FD73.
Those images cannot be played back correctly on other models.
• When the remaining disk capacity indicator flashes, image data cannot be
recorded.
• A MPEG file cannot be played back correctly on this camera.
24-GB
Recorded file
JPEG (640 × 480)
For index screen
JPEG (640 × 480)
JPEG (320 × 240)
For index screen
non-compress
(640 × 480)
JPEG (640 x 480)
For index screen
JPEG (960 × 720)
For index screen
File name
No. of images that
(ex.)
can be recorded
MVC–
STANDARD
001S.JPG
25 - 40
001S.411
001S.JPG
001E.JPG
20 - 35
001S.411
001S.BMP
001S.JPG
001S.411
001M.JPG
001S.411
FINE
15 - 20
12 - 15
1
1
10 - 15