Mounting Hardware Packed With Your Unit; Before Mounting - Oregon Scientific OS6976 Manual De Usuario

MOUNTING HARDWARE PACKED WITH YOUR UNIT

4 –1/4" Spacers
4 –1/2" Spacers
4 – 1" Spacers
4 – 2" Phillips head screws
1 – Mounting template

BEFORE MOUNTING

CAUTION: To reduce the risk of fire, do not place any heating or cooking product
beneath this unit.
• Select a location to mount the Kitchen Companion
• Make sure that there is an electrical outlet nearby
• Follow the section of Installing the Phone and Telephone Operation to check if the phone works
well at the selected location
• Follow the section of Radio Operation to check if the radio works well at the selected location
• Disconnect the AC power supply to the Kitchen Companion
when mounting.
Empty the contents of the cabinet under which the unit is to be mounted and thoroughly clean the
underside to remove any greasy residue. We recommend the unit be mounted at the front edge of
the cabinet.
IMPORTANT: For secure mounting, the screws must go into the unit to a depth of at least 3/8". If the
overall length from the bottom of the cabinet shelf to the bottom of the overhang is more than 5/8",
you will need to use a wood shim. The shim can be located between the cabinet shelf bottom and
the spacers. Make sure the wood is at least as thick as the excess over 5/8". If a shim is necessary,
longer screws (available at most local hardware stores) are required.
os6976-en1.p65
4 – Washers
4 – Cord hooks
CUT OUT ON SOLID BLACK LINE.
CORTE SOBRE LA LÕ NEA S" LIDA NEGRA.
SEE INSTRUCTION BOOK:
Be sure to select the correct height provided
spacers to position this unit at the proper distance
below the front edge of your cabinet. This will
provide access to the handset. Handset will be
slightly below the bottom of your cabinet when
properly installed.
Si no hay una parte sobresaliente
la parte delantera de la Plantilla
debe ser igual con el borde
delantero del Cabinete.
If no overhang
Front edge of Template should
be even with front edge of Cabinet.
FRONT FRENTE
LÌneas de guÌa para ser dobladas
en la parte sobresaliente de los gabinetes.
Fold Guidelines for Cabinet with overhang.
Model 26976A CUT OUT ON SOLID BLACK LINE. CORTE SOBRE LA LÕ NEA S" LIDA NEGRA. Printed in China
11 5/20/2005, 12:09 PM
8