Mounting Procedure - Oregon Scientific OS6976 Manual De Usuario

Cut out the template on the line indicated. The template size and screw hole positions are identical
to the top of the unit.

MOUNTING PROCEDURE

1. If your cabinet does not have an overhang:
a) Position the template in the desired location on the underside of the cabinet, flush with the
front edge of the cabinet.
b) Tape the template in place and go to step 2.
If your cabinet has an overhang:
a) Measure the thickness of the overhang.
b) Fold the front of the template downward along the printed guideline closest to the thickness
of your cabinet.
c) Tape folded-down portion to backside of the overhang, and tape the template to the cabinet
underside.
Measure the
thickness of
cabinet overhang
9
os6976-en1.p65
Front edge of cabinet
Fold template on
dotted line
12
3/8" Minimum
Mounting template
5/20/2005, 12:09 PM