Oregon Scientific OS6976 Manual De Usuario página 5

A. When the power supply cord or
plug is damaged or frayed.
B. If the product has been exposed to
rain or water.
C. If the product does not operate
normally by following the
operating instructions.
D. If the product's cabinet has been
damaged.
E. If the product exhibits a distinct
change in performance.
18. Avoid using a telephone (other than a
cordless type) during an electrical
storm. There may be a remote risk of
electric shock from lightning.
19. Do not use the telephone to report a
gas leak in the vicinity of the leak.
20.Do not place this product on an
unstable cart, stand or table.
The product may fall, causing serious
damage to the product.
21. Plug the adaptor to a socket-outlet
which is near the equipment and is
easily accessible.
22. Risk of explosion if battery is
replaced by an incorrect type, use only
SANIK, 3SN-AA60-S-J1. Dispose
of used batteries according to the
instructions.
23. For servicing or replacement, you can
purchase a suitable headset through
service center or retailer shop (see in
www.oregonsicientic. com)
os6976-en1.p65
To reduce the risk of fire, use only
jack. The supplied adapter meets
these specifications. Using an adapter
that
specifications could damage the
phone or the adapter.
Always connect the AC adapter to the
phone before you connect it to AC
power. When you finish, disconnect
the adapter from AC power before you
disconnect from the phone.
5
CAUTION
No. 26 AWG or larger
telecommunication line cord.
CAUTION
You must use a Class 2
power source that supplies
120V DC and delivers at
least 650mA. Its plug must
fit the phone's DC IN 12V
does not meet
SAVE THESE INSTRUCTION
5/20/2005, 12:09 PM
these
2