System Setup; Language; Local Area Code - Oregon Scientific OS6976 Manual De Usuario

NOTE: - As you scroll through the ringer settings, the phone emits the corresponding
ringer tone level accordingly.
- If you turn the ringer off, the display shows RINGER = OFF when the phone
is in standby mode.
3. Press the ringer HI/LO/OFF button to store. If a change is made, you will hear a con-
firmation tone, and SET RINGER TONE shows in the display.
4. Use the CID VOL(+) / CID VOL(-) arrow keys to select 1, 2, 3 . Ringer tone 2 is the default.
NOTE: As you scroll through the ringer tone settings, the phone emits the corresponding
ringer tone accordingly.
5. Press the ringer HI/LO/OFF button again to store. (if a change is made, you will hear a
confirmation tone).

SYSTEM SETUP

There are four programmable menus available: Language, Area Code, Tone/Pulse Dialing and
Default Setting.
NOTE: - To program these settings, the handset should be OFF (not in TALK mode).
- Press the TONE*/exit button to return to standby mode.

LANGUAGE

Set the display language to show messages in either English, French or Spanish.
1. Press flash/program button until SET LANGUAGE ENG FRA ESP shows in the display.
2. Use the CID VOL(+) / CID VOL(-) arrow keys to select ENG (English), FRA (French) or ESP
(Spanish). English is the default.
3. Press the flash/program button to store (if a change is made, you will hear a confirmation tone).

LOCAL AREA CODE

1. Press flash/program button until SET AREA CODE - - - shows in the display with the first digit
blinking.
2. Use the dial pad to enter your local area code.
3. Press the flash/program button to store (if a change is made, you will hear a confirmation tone).
os6976-en1.p65
SET RINGER TONE
>1 2 3
21
18
5/20/2005, 12:09 PM