Receiving A Call; Making A Call; Line In Use; 3-Way Conferencing - Oregon Scientific OS6976 Manual De Usuario

3. Press and hold the format button on the Kitchen Companion until you hear a beep and PRESS
AND HOLD BASE PAGE KEY shows in the display.
4. Press and hold the page button on the wall base unit.
NOTE: You must press the page button on the wall base unit within 30 seconds to
continue registration.
5. You will hear a confirmation tone when the registration is complete, and the charge unit's
display shows REGISTERED .

RECEIVING A CALL

1. Press the speaker button and begin speaking.
2. When finished, press speaker button again to hang up.

MAKING A CALL

Press the speaker button when reviewing a Caller ID record.

LINE IN USE

When the handset is ON (in TALK mode), LINE IN USE shows in the display of the Kitchen
Companion if it is OFF (not in TALK mode).

3-WAY CONFERENCING

When the charge speakerphone is engaged with an external call ( LINE IN USE shows in the
handset display), press the TALK/call back button on the handset to start the 3-way conference.
NOTE: If handset is ON, press speaker button on charge speakerphone will join the call,
too.
CALL TRANSER
1. While the charge speakerphone is ON (in TALK mode), press the TALK/CALLBACK button on the
handset to join the call.
2. Press the speaker button to hang up the charge speakerphone.

FLASH

Use the flash/program button to activate custom calling services such as call waiting or call
transfer, which are available through your local phone company.
TIP: Don't use the speaker button to activate custom calling services such as call waiting,
or you'll hang up the phone.
23
os6976-en1.p65 26 5/20/2005, 12:09 PM