MTD Shift-On-The-Go 760 Manual Del Operador página 9

Ocultar thumbs Ver también para Shift-On-The-Go 760:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Locatethe shippingbrace,if present,and accompany-
ing warningtag foundon the rightside of the mower,
betweenthe dischargechuteand thecuttingdeck.
See Fig.3-2.
Whileholdingthe dischargechute with yourleft hand,
removethe shippingbracewith your righthandby
graspingit betweenyour thumband indexfingerand
rotatingit clockwise.
WARNING: Theshipping brace, used
for packaging purposes only, must be
removed and discarded before operating
your riding mower.
WARNING: Themowing deck is capable
of throwing objects. Failure to operate the
riding mower without the discharge cover
in the proper operating position could
result in serious personal injury and/or
property damage.
Attaching
The Steering
Wheel
ifthe steeringwheelforyour tractordid notcome
attached,the hardwarefor attachingit hasbeen packed
within the steeringwheel,beneaththe steeringwheel
cap. Carefullypry off the steeringwheelcapand remove
the hardware.
1. With the wheels of the tractor pointingstraight
forward, placethe steeringwheeloverthe steering
shaft.
2. Placethe washer(with thecuppedsidedown)over
the steeringshaftand securewith the hex bolt. See
Fig.3-3.
3. Placethe steeringwheelcap overthe centerof the
steeringwheeland pushdownwarduntilit "clicks"into
place.
Attaching
the Hood Scoop
(if so equipped)
If the hood scoopwas not securedto the hoodof your
tractorat the factory,you willfind it in a plasticbag,
hangingfrom the throttlelever.
To install:
1. Carefullypivot thetractor hoodforward.
2. Removethe fourscrewsfrom the undersideof the
hood scoop.
.
Lineup thefour holesin the hoodscoop with thefour
holes visiblethroughthe tractor'shood Iouvres.See
Figure3-4.
4. Whileholdingthe scoop in place,usea 3/8" socket
wrench(or boxwrench)to carefullytightenthe scoop
ontothe hood.
Do NOTovertighten.
Figure 3=2
Figure 3=3
Figure 3-4
YourLawn
Tractor
WARNING
Make sure the riding
mower's engine is
off, remove the igni-
tion key, and set the
parking brake before
removing the shipping
brace.
The shipping brace,
used for packaging
purposes only, must
be removed and
discarded before
operating your riding
mower.
The mowing deck is
capable of throwing
objects. Failure to
operate the riding
mower without the
discharge cover in
the proper operating
position could result
in serious personal
injury and/or property
damage.
9

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Shift-on-the-go 77913ac762f755

Tabla de contenido