Troubleshooting; Technical Data; Default Settings - Topcom Butler 5400 Manual De Usuario

Topcom Butler 5400

11 TROUBLESHOOTING

Symptom
No display
No tone
The icon flashes
Base or handset do not ring
Not possible to transfer a call on PABX
Telephone does not react to pressing the
keys

12 TECHNICAL DATA

• Standard:
• Frequency range:
• Number of channels:
• Modulation:
• Speech coding:
• Emission power:
• Range:
• Numbr of handsets:
• Powersupply base
• Handset Batteries:
• Handset autonomy:
• Talk time:
• Charging time:
• Normal conditions of use:
• Flash time

13 DEFAULT SETTINGS

• Handset name:
• Auto talk:
• PABX code
• Handset ring volume:
• Ear volume:
• Melody Handset:
• Menu color:
• Base ring volume:
• Base ringtone:
• Pin code:
• Key lock:
• SMS melody:
Topcom Butler 5400
Possible cause
Batteries uncharged
Handset turned OFF
Telephone cord badly connected
The line is occupied by another handset
Handset out of range
The base has no power supply
The handset is not registered on the
base
The ringing volume is zero or low
The FLASH time is too short
Manipulation error
DECT (Digital Enhanced Cordless Telecommunications)GAP (Generic
Access Profile)
1880 MHZ to 1900 MHz
120 duplex channels
GFSK
32 kbit/s
10 mW (average power per channel)
300 m in open space /50 m maximum inhouse
Up to 5
230V / 50 Hz / 35 mA 6,5V DC 180mA & 150mA Model: SD35-405
2 rechargeable batteries AAA, NiMh 750mAh 1,2V
100 hours in standby
10 hours
6-8 hours
+5 °C to +45 °C
100 or 250 ms
B5400
ON
Empty (Off)
3
3
Internal calls = 1 and external = 5
Blue
3
1
0000
Off
On = Morse
Solution
Check the position of the batteries
Recharge the batteries
Turn ON the handset
Check the telephone cord connection
Wait until the other handset hangs up
Bring the handset closer to the base
Check the mains connection to the base
Register the handset on the base
Adjust the ringing volume
Set the unit to Long Flash time
Remove the batteries and put them back
in place
21