Mounting Instructions - DURAVIT SensoWash Starck f Instrucciones De Montaje

Mounting instructions

Please read the pre-installation information sheets prior to the
installation. These are available to download on the Internet at
www.pro.duravit.com.
2
Installation with DuraSystem
If there is no fixed water pipe, the shower toilet can be
mounted in front of a DuraSystem
ductwork.
> Use an additional mounting set,
see www.pro.duravit.com.
4
Installing the noise reduction gasket
> If the noise reduction gasket is included in the delivery,
the z thickness must also be taken into consideration:
z + 50 mm.
> Install the noise reduction gasket.
20
Choosing and installing mounting clip
The delivery contains two mounting clips.
> Choose clip according to cable diameter.
-
25
28
Installing interface with actuator plate (optional)
> Install Interface Set for functional interface with
DuraSystem actuator plate A2.
®
+
46 60
Testing
> Connect the power and water supply.
> Confirm that the product functions properly according
to the operating instructions.
54
Install anti-theft protection
> To fix the remote control permanently to the wall holder
go to step 56.
®
toilet frame with
®
57313_Mounting_SeWa_Starckf_EU/19.08.1
9